vlambda博客
学习文章列表

/** * 获取写锁 Acquires the write lock. * 如果此时没有任何线程持有写锁或者读锁，那么当前线程执行CAS操作更新status， * 若更新成功，则设置读锁重入次数为1，并立即返回 *Acquires the write lock if neither the read nor write lock * are held by another thread * and returns immediately, setting the write lock hold count to * one. * 如果当前线程已经持有该写锁，那么将写锁持有次数设置为1，并立即返回 *If the current thread already holds the write lock then the * hold count is incremented by one and the method returns * immediately. * 如果该锁已经被另外一个线程持有，那么停止该线程的CPU调度并进入休眠状态， * 直到该写锁被释放，且成功将写锁持有次数设置为1才表示获取写锁成功 *If the lock is held by another thread then the current * thread becomes disabled for thread scheduling purposes and * lies dormant until the write lock has been acquired, at which * time the write lock hold count is set to one. */ public void lock() { sync.acquire(1); }/** * 该方法为以独占模式获取锁，忽略中断 * 如果调用一次该“tryAcquire”方法更新status成功，则直接返回，代表抢锁成功 * 否则，将会进入同步队列等待，不断执行“tryAcquire”方法尝试CAS更新status状态，直到成功抢到锁 *

* * Acquires in exclusive mode, ignoring interrupts. Implemented * by invoking at least once {@link #tryAcquire}, * returning on success. Otherwise the thread is queued, possibly * repeatedly blocking and unblocking, invoking {@link * #tryAcquire} until success. This method can be used * to implement method {@link Lock#lock}. * * @param arg the acquire argument. This value is conveyed to * {@link #tryAcquire} but is otherwise uninterpreted and * can represent anything you like. */ public final void acquire(int arg) { if (!tryAcquire(arg) && acquireQueued(addWaiter(Node.EXCLUSIVE), arg)) selfInterrupt(); } protected final boolean tryAcquire(int acquires) { /* * Walkthrough: *

 * 1. If read count nonzero or write count nonzero * and owner is a different thread, fail. *

*2. If count would saturate, fail. (This can only             *    happen if count is already nonzero.)             *

Otherwise, this thread is eligible for lock if             *    it is either a reentrant acquire or             *    queue policy allows it. If so, update state             *    and set owner.             */            Thread current = Thread.currentThread();            //获取读写锁的状态            int c = getState();            //获取该写锁重入的次数            int w = exclusiveCount(c);            //如果读写锁状态不为0，说明已经有其他线程获取了读锁或写锁            if (c != 0) {                //如果写锁重入次数为0，说明有线程获取到读锁，根据“读写锁互斥”原则，返回false                //或者如果写锁重入次数不为0，且获取写锁的线程不是当前线程，根据"写锁独占"原则，返回false                // (Note: if c != 0 and w == 0 then shared count != 0)                if (w == 0 || current != getExclusiveOwnerThread())                    return false;               //如果写锁可重入次数超过最大次数（65535），则抛异常                if (w + exclusiveCount(acquires) > MAX_COUNT)                    throw new Error("Maximum lock count exceeded");                //到这里说明该线程是重入写锁，更新重入写锁的计数(+1)，返回true                // Reentrant acquire                setState(c + acquires);                return true;            }            //如果读写锁状态为0,说明读锁和写锁都没有被获取，会走下面两个分支：           //如果要阻塞或者执行CAS操作更新读写锁的状态失败，则返回false            //如果不需要阻塞且CAS操作成功，则当前线程成功拿到锁，设置锁的owner为当前线程，返回true            if (writerShouldBlock() ||                !compareAndSetState(c, c + acquires))                return false;            setExclusiveOwnerThread(current);            return true;        }

/* * Note that tryRelease and tryAcquire can be called by * Conditions. So it is possible that their arguments contain * both read and write holds that are all released during a * condition wait and re-established in tryAcquire. */ protected final boolean tryRelease(int releases) { //若锁的持有者不是当前线程，抛出异常 if (!isHeldExclusively()) throw new IllegalMonitorStateException(); //写锁的可重入计数减掉releases个 int nextc = getState() - releases; //如果写锁重入计数为0了，则说明写锁被释放了 boolean free = exclusiveCount(nextc) == 0; if (free) //若写锁被释放，则将锁的持有者设置为null，进行GC setExclusiveOwnerThread(null); //更新写锁的重入计数 setState(nextc); return free; }

/** * 获取读锁 * Acquires the read lock. * 如果写锁未被其他线程持有，执行CAS操作更新status值，获取读锁后立即返回 *Acquires the read lock if the write lock is not held by * another thread and returns immediately. * * 如果写锁被其他线程持有，那么停止该线程的CPU调度并进入休眠状态，直到该读锁被释放 *If the write lock is held by another thread then * the current thread becomes disabled for thread scheduling * purposes and lies dormant until the read lock has been acquired. */ public void lock() { sync.acquireShared(1); } /** * 该方法为以共享模式获取读锁，忽略中断 * 如果调用一次该“tryAcquireShared”方法更新status成功，则直接返回，代表抢锁成功 * 否则，将会进入同步队列等待，不断执行“tryAcquireShared”方法尝试CAS更新status状态，直到成功抢到锁 * 其中“tryAcquireShared”方法在NonfairSync(公平锁)中和FairSync(非公平锁)中都有各自的实现 * (看这注释是不是和写锁很对称) * Acquires in shared mode, ignoring interrupts. Implemented by * first invoking at least once {@link #tryAcquireShared}, * returning on success. Otherwise the thread is queued, possibly * repeatedly blocking and unblocking, invoking {@link * #tryAcquireShared} until success. * * @param arg the acquire argument. This value is conveyed to * {@link #tryAcquireShared} but is otherwise uninterpreted * and can represent anything you like. */ public final void acquireShared(int arg) { if (tryAcquireShared(arg) < 0) doAcquireShared(arg); } protected final int tryAcquireShared(int unused) { /* * Walkthrough: * 1、如果已经有其他线程获取到了写锁，根据“读写互斥”原则，抢锁失败，返回-1 * 1.If write lock held by another thread, fail. * 2、如果该线程本身持有写锁，那么看一下是否要readerShouldBlock，如果不需要阻塞， * 则执行CAS操作更新state和重入计数。* 这里要注意的是，上面的步骤不检查是否可重入(因为读锁属于共享锁，天生支持可重入) * 2. Otherwise, this thread is eligible for * lock wrt state, so ask if it should block * because of queue policy. If not, try * to grant by CASing state and updating count. * Note that step does not check for reentrant * acquires, which is postponed to full version * to avoid having to check hold count in * the more typical non-reentrant case. * 3、如果因为CAS更新status失败或者重入计数超过最大值导致步骤2执行失败 * 那就进入到fullTryAcquireShared方法进行死循环，直到抢锁成功 * 3. If step 2 fails either because thread * apparently not eligible or CAS fails or count * saturated, chain to version with full retry loop. */ //当前尝试获取读锁的线程 Thread current = Thread.currentThread(); //获取该读写锁状态 int c = getState(); //如果有线程获取到了写锁 ，且获取写锁的不是当前线程则返回失败 if (exclusiveCount(c) != 0 && getExclusiveOwnerThread() != current) return -1; //获取读锁的重入计数 int r = sharedCount(c); //如果读线程不应该被阻塞，且重入计数小于最大值，且CAS执行读锁重入计数+1成功，则执行线程重入的计数加1操作，返回成功 if (!readerShouldBlock() && r < MAX_COUNT && compareAndSetState(c, c + SHARED_UNIT)) { //如果还未有线程获取到读锁，则将firstReader设置为当前线程，firstReaderHoldCount设置为1 if (r == 0) { firstReader = current; firstReaderHoldCount = 1; } else if (firstReader == current) { //如果firstReader是当前线程，则将firstReader的重入计数变量firstReaderHoldCount加1 firstReaderHoldCount++; } else { //否则说明有至少两个线程共享读锁，获取共享锁重入计数器HoldCounter //从HoldCounter中拿到当前线程的线程变量cachedHoldCounter，将此线程的重入计数count加1 HoldCounter rh = cachedHoldCounter; if (rh == null || rh.tid != getThreadId(current)) cachedHoldCounter = rh = readHolds.get(); else if (rh.count == 0) readHolds.set(rh); rh.count++; } return 1; } //如果上面的if条件有一个都不满足，则进入到这个方法里进行死循环重新获取 return fullTryAcquireShared(current); } /** * 用于处理CAS操作state失败和tryAcquireShared中未执行获取可重入锁动作的full方法(补偿方法？) * Full version of acquire for reads, that handles CAS misses * and reentrant reads not dealt with in tryAcquireShared. */ final int fullTryAcquireShared(Thread current) { /* * 此代码与tryAcquireShared中的代码有部分相似的地方， * 但总体上更简单，因为不会使tryAcquireShared与重试和延迟读取保持计数之间的复杂判断 * This code is in part redundant with that in * tryAcquireShared but is simpler overall by not * complicating tryAcquireShared with interactions between * retries and lazily reading hold counts. */ HoldCounter rh = null; //死循环 for (;;) { //获取读写锁状态 int c = getState(); //如果有线程获取到了写锁 if (exclusiveCount(c) != 0) { //如果获取写锁的线程不是当前线程，返回失败 if (getExclusiveOwnerThread() != current) return -1; // else we hold the exclusive lock; blocking here // would cause deadlock. } else if (readerShouldBlock()) {//如果没有线程获取到写锁，且读线程要阻塞 // Make sure we're not acquiring read lock reentrantly //如果当前线程为第一个获取到读锁的线程 if (firstReader == current) { // assert firstReaderHoldCount > 0; } else { //如果当前线程不是第一个获取到读锁的线程(也就是说至少有有一个线程获取到了读锁) // if (rh == null) { rh = cachedHoldCounter; if (rh == null || rh.tid != getThreadId(current)) { rh = readHolds.get(); if (rh.count == 0) readHolds.remove(); } } if (rh.count == 0) return -1; } } /** *下面是既没有线程获取写锁，当前线程又不需要阻塞的情况 */ //重入次数等于最大重入次数，抛异常 if (sharedCount(c) == MAX_COUNT) throw new Error("Maximum lock count exceeded"); //如果执行CAS操作成功将读写锁的重入计数加1，则对当前持有这个共享读锁的线程的重入计数加1，然后返回成功 if (compareAndSetState(c, c + SHARED_UNIT)) { if (sharedCount(c) == 0) { firstReader = current; firstReaderHoldCount = 1; } else if (firstReader == current) { firstReaderHoldCount++; } else { if (rh == null) rh = cachedHoldCounter; if (rh == null || rh.tid != getThreadId(current)) rh = readHolds.get(); else if (rh.count == 0) readHolds.set(rh); rh.count++; cachedHoldCounter = rh; // cache for release } return 1; } } }

/** * Releases in shared mode. Implemented by unblocking one or more * threads if {@link #tryReleaseShared} returns true. * * @param arg the release argument. This value is conveyed to * {@link #tryReleaseShared} but is otherwise uninterpreted * and can represent anything you like. * @return the value returned from {@link #tryReleaseShared} */public final boolean releaseShared(int arg) { if (tryReleaseShared(arg)) {//尝试释放一次共享锁计数 doReleaseShared();//真正释放锁 return true; } return false;}/** *此方法表示读锁线程释放锁。*首先判断当前线程是否为第一个读线程firstReader， *若是，则判断第一个读线程占有的资源数firstReaderHoldCount是否为1， 若是，则设置第一个读线程firstReader为空，否则，将第一个读线程占有的资源数firstReaderHoldCount减1；若当前线程不是第一个读线程， 那么首先会获取缓存计数器（上一个读锁线程对应的计数器 ）， 若计数器为空或者tid不等于当前线程的tid值，则获取当前线程的计数器， 如果计数器的计数count小于等于1，则移除当前线程对应的计数器， 如果计数器的计数count小于等于0，则抛出异常，之后再减少计数即可。无论何种情况，都会进入死循环，该循环可以确保成功设置状态state */protected final boolean tryReleaseShared(int unused) { // 获取当前线程 Thread current = Thread.currentThread(); if (firstReader == current) { // 当前线程为第一个读线程 // assert firstReaderHoldCount > 0; if (firstReaderHoldCount == 1) // 读线程占用的资源数为1 firstReader = null; else // 减少占用的资源 firstReaderHoldCount--; } else { // 当前线程不为第一个读线程 // 获取缓存的计数器 HoldCounter rh = cachedHoldCounter; if (rh == null || rh.tid != getThreadId(current)) // 计数器为空或者计数器的tid不为当前正在运行的线程的tid // 获取当前线程对应的计数器 rh = readHolds.get(); // 获取计数 int count = rh.count; if (count <= 1) { // 计数小于等于1 // 移除 readHolds.remove(); if (count <= 0) // 计数小于等于0，抛出异常 throw unmatchedUnlockException(); } // 减少计数 --rh.count; } for (;;) { // 死循环 // 获取状态 int c = getState(); // 获取状态 int nextc = c - SHARED_UNIT; if (compareAndSetState(c, nextc)) // 比较并进行设置 // Releasing the read lock has no effect on readers, // but it may allow waiting writers to proceed if // both read and write locks are now free. return nextc == 0; } } /**真正释放锁 * Release action for shared mode -- signals successor and ensures * propagation. (Note: For exclusive mode, release just amounts * to calling unparkSuccessor of head if it needs signal.) */private void doReleaseShared() { /* * Ensure that a release propagates, even if there are other * in-progress acquires/releases. This proceeds in the usual * way of trying to unparkSuccessor of head if it needs * signal. But if it does not, status is set to PROPAGATE to * ensure that upon release, propagation continues. * Additionally, we must loop in case a new node is added * while we are doing this. Also, unlike other uses of * unparkSuccessor, we need to know if CAS to reset status * fails, if so rechecking. */ for (;;) { Node h = head; if (h != null && h != tail) { int ws = h.waitStatus; if (ws == Node.SIGNAL) { if (!compareAndSetWaitStatus(h, Node.SIGNAL, 0)) continue; // loop to recheck cases unparkSuccessor(h); } else if (ws == 0 && !compareAndSetWaitStatus(h, 0, Node.PROPAGATE)) continue; // loop on failed CAS } if (h == head) // loop if head changed break; } }